Products

Products

Designed and created by me, Colin wood, our hob covers have been sold to a wide variety of customers both domestic and commercial. Since the first prototype in 2008, Hob Covers Direct have grown from strength to strength. Now with variety of different sizes and styles to choose from, there is a cover available to suit the vast majority of built in hobs and free standing cookers on the market. If none of our standard covers meet your requirements, we also offer a bespoke service - see below for further information.

Please check our measuring guide before ordering. If in doubt, please contact us to discuss the size of your hob cover before placing your order.

Original Hobco, down
Use for every day items
Original HobCo, up
Original HobCo
Original Hobco with full rubber, down
...in splashback mode
Original HobCo with full rubber, up
Standard corner trim
Please choose type

Original HobCo

The original design, our standard, free-standing hob covers do not attach to your cooker or worktop, but simply sit over your hob. They can be flipped up and stood on end against the wall to act as a splashback, or moved entirely aside. The Original HobCo comes with non-slip rubber corners as standard, or you can upgrade to full rubber edging for an extra £14.99, giving better protection and a sleeker look.

Available in 3 sizes, to fit a variety of standard cookers and hobs. The standard models are suitable for most 4-burner hobs, with the smaller 590 version designed to fit snugly into the space created by a 600-wide cooker hood. The super model is suitable for most 5-burner hobs.

Model Width (mm) Depth (mm) Height (mm) Price
Standard 590 590 512 55 £42.99
Standard 600 600 512 55 £42.99
Super 693 523 70 £47.99
Original Hobco, down
......
Original HobCo, up
.....
Original Hobco with full rubber, down
...
Original HobCo, up
.....
Please choose type

 HobCo Harlequin

Just like our standard 590 & 600 units but with a touch of pizzazz. With this multi diamond cut design, it gives the covers a new added dimension, and will come with FULL rubber trim as standard.
Available in all 3 sizes, to fit a variety of standard cookers and hobs. The standard models are suitable for most 4-burner hobs, with the smaller 590 version designed to fit snugly into the space created by a 600-wide cooker hood. The super model is suitable for most 5-burner hobs.

Model Width (mm) Depth (mm) Height (mm) Price
Harlequin 590 590 512 55 £77.98
Harlequin 600 600 512 55 £77.98
Harlequin sup 693 523 70 £87.98
Original Hobco, down
......
Original HobCo, up
.....
Original Hobco with full rubber, down
...
Original Hobco with full rubber, down
...
Please choose type

 HobCo Slot

For a more formal and clean cut pattern we have the slot design. Very similar to our Ceramic Vented covers. Comes with  FULL rubber trim as standard.
Available in all all 3 sizes.

Model Width (mm) Depth (mm) Height (mm) Price
Slot 590 590 512 55 £77.98
Slot 600 600 512 55 £77.98
Slot sup 693 523 70 £87.98
Ceramic Hob with HobCo Slim
...with HobCo Slim
Ceramic Hob
Ceramic Hob
HobCo Slim as Worktop Space
...and gives the kitchen a sleek look
HobCo Slim
Cover acts as extra worktop space
Please choose type

HobCo Slim

Specially designed for ceramic, halogen or induction hobs, this slimline free-standing cover stands just a few milimetres high, protecting your hob from harm and hiding burnt-on stains. HobCo Slims come with full rubber edging as standard. We find the majority of hobs of this style fit the same size cover, so offer one size with varying height options. If you have an induction hob we recommend the 25mm or 30mm high version, to allow adequate clearance and avoid tripping the built-in safety alarm.

CAUTION: Unlike our Original HobCos, HobCo Slims should not be placed on hobs until they are cool. If you require this feature, please consider the Vented HobCo below.

Model Width (mm) Depth (mm) Height (mm) Price
Slim 10 600 540 10 £52.99
Slim 25 600 540 25 £57.99
Slim 30 600 540 30 £62.99
Vented HobCo Side
...from the side
Vented HobCo
Vented HobCo
Vented HobCo Back
Half-height back on 3-sided version
Vented HobCo Inside
...from the inside
Please choose type

Vented HobCo

In response to customers who wished to cover ceramic or halogen hobs while still hot, we created the Vented HobCo. This hob cover comes in one size, and two styles. One is identcal on all 4 sides, suitable for island hobs, while the other has a reduced-height back, being suitable for standard hobs. With a total of 72 equally-spaced vents on our 3-sided cover or 98 vents on our island hob cover, this design allows air to circulate and heat to escape as your hob cools while under cover, giving you piece of mind that children and pets are protected from potential injury. Vented HobCos come with full rubber edging as standard.

Model Width (mm) Depth (mm) Height (mm) Price
Vented 3-sided 600 540 40 £78.00
Vented Island 600 540 40 £88.00
front view
...Front view
tabs added for extra support
Side View
standard or full
External (W) x (D) x (H)

Free Standing Cookers

We cator for any style of Hob, including FREE-STANDING cookers. Made to customers specific sizes with no additional charge, and a set price starting at £57.99 DELIVERED.

Please also note unless requested all up flanges will be produced the same height unlike our other ranges.

- Maximum Height, width and depth restrictions apply -

Picture shown of cover made with additional side tabs to aid in the support due to no right side worktop. Please enquire if this is needed.

All sizes entered will be made as OUTSIDE sizes, if in doubt, please contact us.

Model Width (mm) Depth (mm) Height (mm) Price
Corner rubber 600max 530max 20max £57.99
Full rubber 600max 530max 20max £72.99
HobCo Hinge Side
...from the side
HobCo Hinge
HobCo Hinge
Hinges Outside
...and from the outside
Hinges Inside
Hinges from the inside
Standard Hinge

HobCo Hinge

Just when we thought we had covered all possible types of hobs, we received requests for a fixed cover. In response we created the HobCo Hinge, a simple, clean and fresh design which is easy to install and instantly transforms your hob environment. This hob cover becomes a permanent fixture, attached to your kitchen work top by 3 discrete fixing screws (supplied) at the rear of the cover. This makes the cover easier to lift without risk of slipping or dropping, an advantage for the elderly or disabled, and also prevents curious children or pets from being able to knock the cover aside. The Hobco Hinge cover is also suitable for hobs in front of windows, where our other covers may not be able to rest safely. Where there is no rear support for the hob cover, such as on island hobs, we can provide a back-supporting safety bar to allow splashback use.

As well as being a stylish addition to any kitchen, our hinged hob covers can be used in boats, caravans or mobile catering vans where our other covers may slide off during transit. In situations such as marquees they can act as safety barriers preventing possible fire damage from the naked flame and preventing fat from splashing on bystanders.

HobCo Hinge covers require a minimum of 25mm between the wall and the hob to allow them to be fixed to the worktop. They can be up to a maximum of 70mm in height, and are all custom-made to your required width and depth.

For our standard size Hinge, please use the pay now option. For all bespoke sizes please contact us

Model Width (mm) Depth (mm) Height (mm) Price
Standard 590 590 525 60 £78.00
Standard 600 600 525 60 £78.00
HobCo
Single use
HobCo
Covers down
Hobco
Covers down
Hobco
Full use
personal reference number

Freestanding Range

Custom Built to suit owners preference, our style of range hob covers can be used to perform almost any style of cooking and provide you with multiple uses. With the ability to minimise your cooking area allowing you extra preperation space close at hand, you can cover all aspects in the kitchen. Also the added feature of the splash back protecting your tiles and grout or excisting splash back. Only £95.99 Delivered for the pair or £67.00 for part coverage.

Please email us your cooker name and model number before purchasing and also if possible a top view pictue.

Bespoke HobCo
cover down
Bespoke HobCo
Made to fit any space
Bespoke HobCo
Split cover provides worktop space
Bespoke HobCo
Hinged cover on free-standing cooker
Bespoke HobCo
Domino cover
Bespoke HobCo
Domino cover / Splash-back
personal reference number

Bespoke HobCo

If none of our standard covers suit your requirements, we offer a bespoke made-to-measure service and can manufacture a cover to suit almost any shape and size hob for built in or free-standing cooker and ranges. Covers can be single piece or split to reflect your use of your cooker, and can be free-standing or hinged.

If you require a bespoke HobCo please contact us to disucss your requirements and receive a quote. Please see our measuring guide and provide measurements of your hob, along with details such as whether you require a hinged or free-standing cover. We strongly recommend that you also include a photo of the top of your hob, to help us ensure that your hob cover will fit perfectly. If you have already received a quote for a bespoke HobCo and would like to place an order, please enter your personal reference number to place your order and make payment.

Accessories

Please choose type
HobCo Lock
HobCo Lock

HobCo Lock

For those wishing extra added security, we offer a lock which can be attached to any of our free-standing or hinged covers. Ideal for nursing and residential homes, schools, community centres, pubs, clubs - the list goes on.

Please ensure that you choose the correct height lock for your cover.

????
HobCo Lifting Aid
????

????

HobCo Lifting Aid

Although our covers are extreamly light, we can now offer the option of adding easy grip handles on the sides (x2) or front (x1) of the covers, which helps enable easy lifting for arthritic and other restricting conditions to assist in daily living.
We are always here to help and happy to customise any cover to suit any needs.

Please email or call with your enquiries large or small.

Always happy to provide a service.